Free OSHA compliance assessment
See which OSHA programs apply to your site and where the gaps are. About 2 minutes.
- Facility
- Equipment
- Specifics
- Workplace
- Programs
Your facility
Industry
Employees at this site
How the safety program gap assessment works
OSHA rules apply based on the hazards in your workplace. A plant with forklifts, chemicals, and machines that need maintenance can owe a dozen written programs, inspections, and training sessions, and it’s easy to miss one. This assessment works through it in short steps and skips anything that doesn’t fit your facility:
- Your facility: industry, headcount, and state decide which recordkeeping rules and written plans apply.
- Quick questions: a few yes, no, or not sure questions at a time find the standards that cover you.
- Your programs: one answer per program. Pick “Partly” to check off the parts you already have.
You get a readiness score, your top priorities, a program-by-program breakdown with links to each standard, and a calendar of every recurring inspection, test, and review.
Lockout/tagout is one of OSHA’s most cited standards
The control of hazardous energy standard (29 CFR 1910.147) appears on OSHA’s most frequently cited list every year. It requires a machine-specific procedure for each piece of equipment and an inspection of each procedure at least once a year. Start with the free lockout/tagout procedure template, or keep every procedure in one place with Tegis lockout/tagout software.
Request a demoFrequently asked questions
Which OSHA standards apply to my business?
It depends on what your employees do, not just your industry. Nearly every general industry employer needs a PPE hazard assessment, emergency action and fire prevention plans, injury reporting, and the OSHA poster. Machines, chemicals, forklifts, confined spaces, noise, and work at heights each add their own standards. The assessment above maps your answers to the programs that likely apply.
Which OSHA programs must be written?
Common written programs include hazard communication, lockout/tagout energy control, permit-required confined spaces (when employees enter), respiratory protection, bloodborne pathogens exposure control, the PPE hazard assessment certification, and emergency action and fire prevention plans for employers with more than 10 employees.
What has to be done every year?
Annual items include the lockout/tagout periodic inspection, respirator fit testing and training, audiograms and hearing conservation training, the bloodborne pathogens plan review and training, fire extinguisher maintenance, the confined space program review, and posting the OSHA 300A summary from February 1 to April 30. The results page lists the ones that apply to you.
Are my answers saved or uploaded?
Your answers stay in this browser so you can come back to them. Nothing is sent to Tegis unless you choose to email yourself the report.
Is this an official OSHA audit?
No. It is a starting point based on federal OSHA general industry standards (29 CFR 1910, 1904, and 1903). States with their own OSHA plans can add requirements, and some standards are not covered. Use it to plan a full review with your safety team or consultant.
