Most cited OSHA violations by industry

See which standards federal OSHA cites most in your industry, with citation counts and penalties for FY2026.

National top 10, FY2026

OSHA’s preliminary ranking across all industries, October 2025 to August 2026. OSHA publishes the order without counts. Pick an industry to see its numbers.

  1. 1
    Fall protection (construction)29 CFR 1926.501
  2. 2
    Hazard communication29 CFR 1910.1200
  3. 3
    Lockout/tagout (control of hazardous energy)29 CFR 1910.147
  4. 4
    Scaffolding29 CFR 1926.451
  5. 5
    Ladders (construction)29 CFR 1926.1053
  6. 6
    Respiratory protection29 CFR 1910.134
  7. 7
    Powered industrial trucks (forklifts)29 CFR 1910.178
  8. 8
    Fall protection training (construction)29 CFR 1926.503
  9. 9
    Eye and face protection (construction)29 CFR 1926.102
  10. 10
    Machine guarding29 CFR 1910.212

Source: OSHA Top 10 Most Frequently Cited Standards.

Are these gaps at your site?

The free compliance assessment checks the programs behind these citations, one requirement at a time.

Take the free assessment →

Lockout/tagout leads manufacturing citations

The control of hazardous energy standard (29 CFR 1910.147) was the most cited standard in 9 of the 13 manufacturing industries above. Common lockout citations include missing machine-specific procedures, skipped annual inspections, and gaps in training. Start with the free procedure template and the annual inspection form, or keep every procedure in one place with Tegis lockout/tagout software.

How to use this list

The standards cited most in your industry are the ones inspectors look at first. Check each one against your own program, starting with the top three. The free OSHA compliance assessment walks through the requirements behind most of these standards, and the incident rate calculator shows how your injury rates compare with your industry.

Frequently asked questions

Where does this data come from?

It comes from federal OSHA’s Frequently Cited Standards data, which lists every standard cited for an industry by NAICS code. These figures cover citations issued October 2025 through September 2026.

Why isn’t my state’s data included?

The numbers only cover federal OSHA. States that run their own OSHA plans, such as California, Michigan, and Washington, enforce their own programs, and their citations aren’t in this data.

What is the General Duty Clause?

Section 5(a)(1) of the OSH Act requires employers to keep the workplace free of recognized serious hazards. OSHA cites it when a hazard isn’t covered by a specific standard, such as heat or ergonomic hazards.

Are the penalties final?

They’re current amounts, which reflect settlements and reductions made so far. They can change as open cases close.

How do I find my NAICS code?

Your NAICS code is on many federal and state tax filings, and the U.S. Census Bureau has a lookup tool. The first three digits are enough for this lookup.