Authorized employees lock out or tag out equipment and service it; affected employees operate or work near that equipment and must recognize a lockout and never disturb it. OSHA 1910.147 gives each role different training and duties, and inspectors ask employees which role they hold.
This guide defines each role, the training OSHA requires for it, and the gray areas that trip up real plants: contractors, group lockouts, and the operator who is also the maintenance tech.
The three roles OSHA defines
OSHA 1910.147 divides everyone at a facility into three categories, and every person on the floor falls into exactly one of them for any given servicing activity:
- Authorized employee: a person who locks out or tags out machines in order to perform servicing or maintenance. This is the person who applies the locks, follows the machine-specific procedure, and verifies zero energy. The equipment operator whose duties include servicing is an authorized employee.
- Affected employee: a person whose job requires them to operate or use a machine on which servicing is performed under lockout, or whose job requires them to work in the area where the servicing happens. They do not lock anything out; they must understand what lockout means and obey its prohibitions.
- Other employee: everyone else in the vicinity. Their entire duty is simple: locked-out equipment is off limits, and they must be instructed never to attempt to restart or re-energize it.
| Role | Who they are | What they must know |
|---|---|---|
| Authorized employee | Performs servicing and applies the locks | Recognize energy sources, isolate and verify zero energy, follow the machine-specific procedure |
| Affected employee | Operates the equipment or works in the area | What lockout means; never restart or remove a lock |
| Other employee | Works elsewhere in the facility | Locked-out equipment is off limits, never touch it |
Authorized employees: who qualifies and what they must be trained on
Authorized status is earned through training and demonstrated knowledge, not simply assigned. An authorized employee must be trained to recognize hazardous energy sources, understand the type and magnitude of energy on the machines they service, and know the methods of isolating and controlling that energy.
That means an authorized employee needs to be able to read the machine-specific procedure and execute it: notify affected employees, shut down, isolate, apply personal locks, release stored energy, and verify zero energy before work begins. When their duties change, or when equipment or procedures change, OSHA requires retraining, and the employer must certify that the training happened.
Affected employees: what they must understand
Affected employees need a different (and shorter) education: they must be instructed in the purpose and use of the energy control procedure, and in the prohibition against attempting to restart or re-energize machines that are locked out. They do not need to know how to isolate the equipment, only that a lock and tag mean hands off, always.
When tagout is used instead of lockout, rarer, but legal in specific cases, affected employees must also be taught that a tag is only a warning, that they must never remove or bypass it, and that tags can evoke a false sense of security. When lockout procedures are modified or a new hazard is introduced, affected employees get a refresher.
The gray areas that cause real problems
Real plants do not always fit the clean definitions. These are the situations inspectors probe most often, and how to handle them:
- The dual-role operator. An equipment operator who also performs servicing is an authorized employee when servicing and an affected employee when running the machine. Train for both roles and document both.
- Outside contractors. Under 1910.147(f)(2), the on-site employer and outside employer inform each other of their respective energy-control procedures. The provision separately directs the on-site employer to ensure its employees understand and comply with applicable restrictions and prohibitions in the outside employer’s program. Coordinate the actual work and protection method before servicing.
- Group lockout. When several authorized employees service one machine, the group method must provide protection equivalent to a personal device. Each authorized employee affixes a personal device to the group lockbox or comparable mechanism when beginning work and removes it when stopping, as 1910.147(f)(3) requires.
- Shift changes. The employer provides specific procedures for orderly transfer of lockout or tagout protection between outgoing and incoming employees under 1910.147(f)(4).
- Working near, not on. Classify workers by their actual duties and exposure. A worker whose job requires work in the area where servicing takes place may be an affected employee; other employees whose work may be in the area need the instruction specified in 1910.147(c)(7).
Why inspectors care about the distinction
OSHA citations frequently combine two failures: an employee who performed servicing without authorized-employee training, and affected employees who were never told what the locks mean. When an inspector interviews workers, one of the first questions is "what does that lock mean to you?", and the wrong answer becomes a citation.
The fix is procedural, not heroic: keep a training matrix that maps every employee to their role, deliver role-appropriate training on a schedule, and re-run it when equipment or assignments change. Record who was trained, when, on what, and who certified it, because the certification is the first document an inspector requests.
Frequently asked questions
Can someone be both an authorized and an affected employee?
Yes, and it is common. A maintenance tech who runs a machine between repairs is authorized when servicing it and affected when operating it. OSHA defines the roles per activity, not per person. Train and document both roles for dual-role employees.
Do contractors need to follow our lockout procedure?
Under 1910.147(f)(2), the on-site and outside employers inform each other of their respective energy-control procedures. The provision specifically directs the on-site employer to ensure its employees understand and comply with applicable restrictions and prohibitions in the outside employer’s program. Determine and document each employer’s responsibilities for training and protection under the applicable requirements; the procedure exchange alone does not replace them.
Who trains affected employees, and how long does it take?
The employer is responsible for affected-employee training, typically delivered by EHS staff or supervisors. It is a focused briefing: the meaning of lockout devices, the prohibition on restarting, and tagout specifics if used, usually under an hour, refreshed when procedures or equipment change.
Is annual retraining required for authorized employees?
The standard does not set a fixed annual retraining interval. Under 1910.147(c)(7)(iii), retraining is required when job assignments change, machines, equipment, or processes present new hazards, procedures change, or an inspection or other information shows a knowledge or use gap. Employers may choose additional refresher training.
Can an affected employee remove a lock or tag?
Affected employees must be instructed in the purpose and use of the procedure. The applying employee ordinarily removes a device; if unavailable, the employer may direct removal only under the specific procedure and training required by 1910.147(e)(3). Employees must not remove or bypass devices contrary to the employer’s procedure.
