OSHA’s lockout/tagout standard, 29 CFR 1910.147, ranked No. 4 on OSHA’s final FY2025 most-cited list with 2,177 federal violations. In 2026, federal penalties reach $16,550 per serious violation and $165,514 per willful or repeated violation.
Citation counts do not measure severity or causes, and penalty figures are maximums, not predictions. The examples below describe requirements and possible program gaps, not a ranking; check the official OSHA standard and penalty schedule before relying on them.
Why LOTO keeps topping the citation list
Section 1910.147 applies to covered servicing and maintenance where unexpected energization, startup, or stored-energy release could injure employees, subject to the standard’s scope and exceptions. The employer must establish an energy-control program with procedures, training, and periodic inspections. The standard specifies what procedures and certifications must contain; it does not require one particular software or paper system.
Examples of requirements to check
Use these examples to review the written program and field practices against the actual requirements. They are not ranked by frequency:
- Required energy-control procedures are not developed, documented, or used, and no documentation exception applies
- A procedure does not clearly and specifically describe the required scope, purpose, authorization, rules, and techniques
- The employer has not conducted and certified periodic inspections at least annually
- Authorized, affected, or other employees have not received the training required for their roles
- The procedure or field practice does not control all applicable energy sources and stored or residual energy
- Lockout or tagout devices are not applied and removed under the employer’s procedure
- The program does not address applicable group lockout, shift changes, or outside servicing personnel
What violations cost (approximate penalties)
OSHA’s 2026 notice states that no inflation adjustment was made for 2026. The federal maximums therefore remain $16,550 for a serious, other-than-serious, or posting violation; $165,514 for a willful or repeated violation, with an $11,823 minimum for a willful violation; and up to $16,550 per day for failure to abate.
These are maximum amounts, not a prediction of a proposed or final penalty. Check OSHA’s current penalty schedule before quoting amounts.
The penalty for a case depends on the specific citation and applicable factors. Do not estimate a facility’s likely total by multiplying a maximum by the number of machines; OSHA determines citations and proposed penalties from the facts of the inspection and applicable law.
| Violation type | Maximum (federal, 2026) |
|---|---|
| Serious / other-than-serious / posting | $16,550 per violation |
| Willful or repeated | $165,514 per violation (min $11,823 willful) |
| Failure to abate | $16,550 per day past the deadline |
The costs that never show up in the citation
A serious energy-control failure can also lead to injury, equipment damage, downtime, and investigation costs. Actual consequences depend on the event and employer; this article does not estimate them.
How inspections actually find LOTO violations
During an inspection, OSHA may examine covered work practices and request relevant energy-control procedures, training certifications, and periodic-inspection certifications. The employer should be able to identify the procedure that applies to the equipment and show how it is implemented under the program.
A prevention sequence that maps to the citations
Review the equipment within the scope of 1910.147, confirm that procedures are developed, documented where required, and used, and maintain training and periodic-inspection certifications. Ensure the procedure is available to employees as required by the employer’s program.
Tegis QR access can provide a digital path to a published procedure when the device has an internet connection; the employer still controls the content and field process.
Frequently asked questions
What is the OSHA penalty for a lockout/tagout violation?
The 2026 federal maximums are $16,550 for a serious violation; $165,514 for a willful or repeated violation, with an $11,823 minimum for willful; and up to $16,550 per day for failure to abate. These are caps, not a predicted penalty. See the current OSHA penalty schedule.
Can I estimate the penalty by counting machines?
No. Do not multiply a maximum penalty by the number of machines to predict a case. OSHA determines citations and proposed penalties from the facts, the applicable requirements, and the law. Consult OSHA or qualified counsel for case-specific advice.
Do LOTO incidents have to be reported to OSHA?
Employers must report fatalities within 8 hours, and in-patient hospitalizations, amputations, and loss of an eye within 24 hours. Unexpected start-up injuries frequently fall into the amputation or hospitalization categories, which trigger the post-incident inspections where LOTO files get fully examined.
How often are OSHA penalty amounts updated?
Usually each January under the federal inflation-adjustment law, but not guaranteed. 2026 held flat at 2025 levels when no adjustment was published, so never assume this year’s number equals last year’s. Because the amounts move in most years, budget conservatively using the willful/repeated maximum rather than the serious-violation figure when you build the internal business case for program investment.
Which industries get cited most for LOTO?
In the FY2025 federal data, plastics products manufacturers and machine shops led the industries cited under 1910.147. The broader lesson: any sector with frequent servicing of multi-energy equipment (manufacturing, food processing, and metals especially) sits high on the list, because exposure volume drives citation volume.
