OSHA 1910.147(c)(7) requires role-based LOTO training: authorized employees learn energy sources and isolation methods, affected employees learn the purpose and use of the procedure, and other employees learn not to restart locked-out equipment. Retraining is triggered by changes or observed gaps, not a fixed annual clock, and the employer must certify the training.
This guide covers who learns what, retraining triggers, what the certification must contain, and how to run training that holds up on a real shift.
The three training audiences
OSHA 1910.147(c)(7) requires training matched to the employee role. One generic toolbox talk for everyone does not satisfy the standard. Each group needs different content because each group carries different duties:
- Authorized employees: anyone who locks out equipment to perform servicing. They need the full program: recognition of hazardous energy sources, the type and magnitude of energy in the workplace, and the methods of isolation and control.
- Affected employees: operators and nearby workers whose machines get locked out. They need the purpose and use of the energy control procedure, and the prohibition on restarting locked-out equipment.
- Other employees: everyone else who could encounter a lockout. They need to know the procedure exists and that locked or tagged equipment is never to be touched or restarted.
What authorized-employee training must cover
Authorized training is the deep end. The employee must leave able to read a machine-specific procedure and execute it: notify affected employees, shut down normally, isolate every source, apply personal locks, release stored energy, and verify zero energy before work.
OSHA has stated explicitly that merely handing out copies of procedures is not training. The employer must build real skill and knowledge: the ability to isolate every source on the machines the employee actually services. That means hands-on walkthroughs at the equipment, not just a video in a break room.
The six extra topics when tags are used
Wherever tagout is used, every affected and authorized employee must also be trained on the limitations of tags under 1910.147(c)(7)(ii), because a tag restrains nobody:
- Tags are warning devices only and provide no physical restraint
- Tags must not be removed without authorization, bypassed, ignored, or defeated
- Tags must be legible and understandable to everyone in the area
- Tags and attachments must withstand the workplace environment
- Tags can create a false sense of security: their meaning is part of the program
- Tags must be securely attached so they cannot come off accidentally
How often: retraining triggers, not a calendar
OSHA sets no fixed annual retraining interval for LOTO: a common misconception. Retraining is event-driven under 1910.147(c)(7)(iii): whenever job assignments change, machines or processes present a new hazard, energy control procedures change, a periodic inspection reveals deviations, or the employer has reason to believe an employee no longer understands the procedure.
An employer may choose to provide refreshers on a schedule, but the standard does not set a fixed annual retraining interval. Provide retraining when one of the regulatory triggers applies and certify it under the employer’s process.
The certification you must keep
Under 1910.147(c)(7)(iv), the employer must certify that training happened and is current. Each certification must contain the employee name and the training date. Best-practice records go further: the employee role (authorized, affected, other), which machines and procedures were covered, the training method, assessment results, and the trainer identity.
The certification required by the standard must identify each employee and the training date. Keep additional records of topics, role, or trainer if the employer’s program or other applicable requirements call for them.
Training that actually sticks
Training should address the employee’s role and the equipment and procedures relevant to their work. Involving authorized employees in reviewing procedures can help identify gaps, but the employer remains responsible for providing and certifying required training.
The standard does not prescribe one training format. Whatever method the employer uses must provide the knowledge and skills required for the employee’s role, including safe application, use, and removal of energy controls for authorized employees. Evaluate online or classroom content against those requirements and the actual equipment.
Frequently asked questions
Is lockout/tagout training required annually?
No fixed annual interval is specified. Retraining is required when job assignments change, machines, equipment, or processes present a new hazard, energy-control procedures change, or inspections or other information reveal a need under 1910.147(c)(7)(iii). Employers may also choose additional refreshers.
Is online LOTO training enough for authorized employees?
The standard does not require one particular delivery format. The employer must ensure authorized employees receive the knowledge and skills necessary for safe application, use, and removal of energy controls. Assess an online course against the actual equipment and procedure; a generic completion certificate alone does not establish that the required training was provided.
What training records does OSHA ask for?
The certification must identify each employee and the training date. The employer must also provide the role-specific training required by 1910.147(c)(7); keeping a record of topics and role can help show what was covered, although the standard’s certification fields are the employee name and training date.
Do contractors and temp workers need LOTO training?
Yes. The host employer and the outside employer must brief each other on lockout procedures before work starts, and temp workers get the same role-based training as permanent workers in the same exposure. See our contractor and shift-change guide for the full handover.
What triggers retraining fastest in practice?
Retraining is required when an inspection or other information reveals that an employee’s knowledge or use of an energy-control procedure has a deviation or inadequacy. Other triggers include job assignment changes, new hazards, and procedure changes under 1910.147(c)(7)(iii).
